Filter
Top Products
ASSEMBLY
F
35
• Before applying the labels, wipe the surface of the vehicle with a
clean, dry cloth to remove any dust or oils.
• First apply the inside edge of a label to the back end of the
vehicle. Next, apply the outside edge of the label to the side of
the vehicle. Then, smooth the center of the label. (The edges will
overlap slightly.)
• For best results, avoid repositioning a label once it has been applied
to the vehicle.
37
• Fit the wing tabs into the slots in the top edge near the rear of
the vehicle.
Hints:
• There is a left and right wing. They are designed to be assembled
one way.
• Make sure the tabs on the top of the taillights fit into the bottom of
each wing.
Wings
36
• Fit the taillights (left and right) onto the rear of the vehicle.
Taillights
19
H0440pr-0920
11
12
38
• Insert two #8 x
3
/4
"
screws into each wing. Tighten the screws.
Taillight Tabs