Filter
Top Products
Fluke Ti30 Thermal Imager
Unbeatable solution for infrared predictive maintenance.
InsideIR software:
Powerful and flexible.
The Fluke Ti30 Thermal Imager allows
maintenance personnel to quickly and
easily capture high-quality infrared images.
Because the camera collects 12 bits of
information for every one of its 19,200
pixels, users in the field can simply
point, focus and shoot. With a properly
composed, well-focused image, all
further analysis can be performed with
the InsideIR software in the quiet,
comfort and safety of an office.
In the imager during the scan, or later in
the InsideIR software, adjust:
• Palette settings
• Emissivity
• Reflected temperature correction values
• Level and gain
This approach provides flexibility and
eliminates the need to re-scan equipment
if different settings are desired once the
user is back in the office. The file of
images and data can also be e-mailed
to other Ti30 imager-InsideIR software
users, making information sharing and
cross-checking easy.
Capture clear thermal images and easily
analyze the radiometric (temperature)
data for all 19,200 pixels.
Analyze individual images, easily identify hot
(or cold) spots and select areas for min., max.
and avg. temperature values.
Obtain high-quality
thermal images with
a simple “click” of
the trigger.
Download images and
data into the companion
InsideIR software for
analysis and reporting.
Inspections can now be delegated to electricians and
mechanics, those most familiar with the equipment.
They simply follow the on-camera, step by step routing
instructions, point, focus and shoot.
Assign a unique name,
preset emissivity and
RTC values, assign
alarm limits and add
meaningful comments
to each measurement
location.
Quickly and easily create professional
reports using InsideIR software.
Inspection routes improve
maintenance performance.
Both preventive and predictive
maintenance programs rely on
periodic inspections of critical plant
assets. To optimize a program’s
success, maintenance personnel
develop inspection routes by
determining the frequency, sequence
and physical course for equipment
needing inspection.
The Fluke Ti30 Thermal Imager
uniquely supports thermography
inspection routing. After the first
inspection, the images taken can be
combined in the InsideIR
™
software
with location names and temperature
data, and uploaded to the imager for
use as a routing guide.
During subsequent inspections,
an on-camera display prompts the
user exactly where to take images—
improving accuracy. The new images
are easily compared to previous
scans, helping to identify potential
problems before they cause failure.
Expand your predictive
maintenance program.
The Fluke Ti30 Thermal Imager
enables plant thermography
specialists to manage a much larger
infrared predictive maintenance
program—and delegate inspection
routing responsibilities to appropriate
personnel, such as electricians
and mechanics, who specialize
in the equipment being inspected.
This frees the trained expert to
handle program management,
image analysis and interpretation,
and report generation.
Easy to learn and easy to use.
• Single-level menus make set-up easy, without
the complicated multi-layer decisions other
imagers require.
• Gain and level controls can be set to “automatic”
or changed manually for maximum flexibility.
• Squeeze trigger once to freeze an image—
then choose whether to store it or discard
without saving.
• Direct access switches for laser, temperature
scale, palette, backlight and measurement
modes means changing takes only a second.
Designed for the industrial
maintenance environment.
The Ti30 thermal imager enables infrared
inspections all day—every day. The camera’s 5+
hour battery life, and 100-image storage capacity,
are more than enough for an entire shift of
uninterrupted inspections. Other systems would
require three batteries, multiple chargers, and/or
additional memory devices for similar performance.
With the rugged Ti30 thermal imager, maintenance
organizations can conduct thermographic inspec
-
tions anytime, anywhere, and identify potential
equipment problems before they cause failure.
Use the Ti30 imager regularly—not just in a crisis
or for an annual maintenance check.
Includes professional thermography
training course
*
to accelerate return
on investment.
• Practical, hands-on course designed to
shorten the learning curve for new
Fluke Ti30 Thermal Imager owners covers:
– Infrared and thermography theory
– Primary applications for electrical and
mechanical systems
• Taught by certified thermography
professionals.
*
In U.S. and Canada. Training program varies by country.
Travel expenses not included.
Versatile solution for
plant maintenance professionals.
• High performance features for the expert, packaged in an easy
to use device for beginners.
• Adjust key image parameters (emissivity, RTC, temperature level
and gain) in the field on the camera, or back at the office on the PC.
• Large, clear LCD display works well both indoors and outside.
• Use the docking station for USB communications in the office,
or the USB field cable when working remotely.
• Use the rechargeable battery pack or the standard AA pack.
Best complete thermography solution