Franke Consumer Products FDL 364 W Ventilation Hood User Manual


 
EN
9
9
Mounting the hood body
Screw the two screws 12d supplied onto the brackets 7.1.
• Hook the hood body onto the bracket 7.1, centring it around
the vertical line.
Use the adjusting screws 12d underneath the hood to level the
hood body.
Note: The Hood body should be secured to wall studs. If neces-
sary, install a wood support behind the dry wall, flush mounted
between 2 studs. This will provide the necessary structure and
support for mounting.
12.d
7.1
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using a rigid 6” duct.
• Install the damper 10 ø 6”.
• Fix the duct in position using sufficient pipe clamps (not sup-
plied).
10
DUCTLESS VERSION AIR OUTLET
• Put connection 15 into the connection support 7.3.
Fix to the support using the 2 screws 12e supplied
• Connect the air outlet connection 15 to the hood body outlet
using either a rigid ø 6” pipe(not supplied).
Ensure that the activated charcoal filters have been inserted.
15
12e