Filter
Top Products
EN
1
9
19
AIR OUTLET IN RECIRCULATING VERSION
• Re-position any components already fitted for recir-
culating version that have been removed.
• Re-position reduction flange 9 onto the hood body.
• Re-position pvc pipe 7 onto the flange.
• Re-tighten the inclinable grid 8 onto the air outlet,
making sure it is positioned well on the pipe.
• Make sure the charcoal anti-odour filters are in place.
8
7
9
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole
switch having a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Mainte-
nance) being sure that the connector of the feeding
cable is correctly inserted in the socket placed on the
side of the fan.