Operating Your Refrigerator
Do not plug in the refrigerator for 24 hours after unit is set in place. Failure to
do so may result in the unit working improperly.
Thermostat
The thermostat has settings from 0 through 7.
0 is the warmest. 7 is the coldest.
Initially set the thermostat to 3 or 4.
After using the refrigerator for 24 hours, adjust
the thermostat to the setting that is best suited
to your needs. Turning the thermostat to 0
stops the cooling cycle but does not shut off power to the refrigerator.
Important: If you unplug or turn off the refrigerator, allow 3 minutes before
restarting it or plugging it back in. It will not restart in less than 3 minutes
.
Freezer Compartment and Use of the Ice Cube Tray
This freezer compartment has a “0" degree freezer that can be used as a
primary-use refrigerator. Please check to determine how long certain meats
and fish can be safely stored in a frozen state.
• To make ice, fill the tray with water and place inside the freezer
compartment.
• To release ice cubes, hold tray upside down over an ice bucket or bowl,
and twist tray at both ends.
• If ice cube tray freezes to the floor, pour a little warm water around it to
loosen it. Do not use boiling water which can damage plastic parts, or
sharp metal objects such as a knife or screwdriver which can damage the
cooling system tubing.
Wash tray in lukewarm water only. Do not wash in the dishwasher.
Shelving
The refrigerator has shelves that can be moved to different levels to suit your
food storage needs. The door shelves provide storage for small and large
items and a bottle storage area for tall bottles.
4