Filter
Top Products
18
2. Remove the condenser air filter with a screwdriver.
3. Use a brush to wipe up and down the filter surface with a mild detergent solution such
as 1 oz. of dishwashing liquid mixed with 2 gallons of warm water. Do not use
solvent-based or abrasive cleaners. Rinse the filter with clean water several times.
4. Air-dry the filter, then reinstall it.
Control Panel (at the back of the machine)
You will find the control panel at the back of the machine. This panel includes one
button, one adjustable screw and four indicator LEDs.
Operation of the control panel:
1. When the unit is plugged in and the power switch is turned on, the power indicator and
the other three indicator lights are all on.
2. After three minutes for water inlet, the ice maker will start to make ice automatically.
Only the power and ice-making indicators will be on.
3. During harvest, the harvest indicator light is on and ice-making indicator off. When
the ice storage bin is full, only the ice-full indicator and power indicator are on.
4. If the Clean button is pressed during the ice-making mode, it will be ignored. The
ice-making will continue.