Filter
Top Products
6
Before Operating Your Dishwasher Please Read Normal Operating
Sounds on page 4!
Delay Start/Status Lights
Delay Start (available on select models)
Allows you to delay starting the POTS & PANS
cycle up to 6 hours.
Turn dial to select number of hours.
Press POTS & PANS pad.
Select desired OPTIONS.
The DELAY START indicator light will come
on when door is closed and remain on as the
timer counts down to begin cycle.
Clean Indicator (available on select models)
The CLEAN indicator light will come on when a
cycle is complete. To turn it off, turn dial
slightly until light goes off.
Getting Started
1. Load dishwasher (See Preparing and
Loading Dishes).
2. Add detergent (See Dishwasher Dispenser
& Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Select desired cycle (See Wash Cycle
Selections). The indicator will show red
when selected.
5. Turn dial clockwise to select cycle or
number of hours for delay start (available
on select models.)
6. Select desired energy OPTIONS (See
Energy Options). The indicator will show
red when selected.
7. If using DELAY START, (available on select
models) go to step number 9.
8. Run hot water faucet nearest dishwasher
until water is hot. Turn water off.
9. To start, close door to latch.
Operating Instructions (continued)
Latch Clean
Model FDB435
Delay StartVent
400 Series