Filter
Top Products
6
fEAtuRES
Wash inside surfaces of the refrigerator with a solution
of two tablespoons of baking soda in one quart (1.136
litres) warm water. Rinse and dry. Wring excess water out
of the sponge or cloth when cleaning in the area of the
controls, or any electrical parts.
Wash the removable parts with the baking soda solution
mentioned above, or mild detergent and warm water.
Rinse and dry. Never use metallic scouring pads,
brushes, abrasive cleaners, or alkaline solutions on any
surface. Do not wash removable parts in a dishwasher.
Wash the cabinet with warm water and mild liquid
detergent. Rinse well and wipe dry with a clean soft
cloth.
If the refrigerator will not be used for several months:
Remove all food and unplug the power cord.
Clean and dry the interior thoroughly.
Leave the refrigerator door open slightly, blocking it
open if necessary, to prevent odor and mold growth.
Moving: When moving the refrigerator, follow these
guidelines to prevent damage:
Disconnect the power cord plug from the wall outlet.
Remove food and clean the refrigerator.
Secure all loose items by taping them securely in
place to prevent damage.
In a moving vehicle, secure the refrigerator in an
upright position to prevent movement. Also, protect
the outside of the refrigerator with a blanket or
similar item.
WARnInG
If leaving the refrigerator door open while on vacation,
make certain that children cannot get into the wine
cooler and become entrapped.
Multi-position adjustable interior shelves can be moved
to any position for larger or smaller bottles. The shipping
spacers that stabilize the shelves for shipping should be
removed and discarded.
A Slide-Out Basket (some models) located at the bottom
of the refrigerator, provides separate storage space for
items that are difcult to store on refrigerator shelves. To
remove the basket, pull out and lift up.
The Freeze Control Feature will maintain proper interior
refrigerator temperature even when the refrigerator is
placed in an area where the surrounding temperature
drops down to 10° F (-12° C).
The light comes on automatically when the door is
opened. To replace the light bulb, turn the temperature
control to OFF and unplug the electrical cord. Replace the
old bulb with a bulb of the same wattage.
To defrost the refrigerator, remove all food and 1.
objects from the refrigerator. Ensure the drip pan is
in place under the freezer compartment. Unplug the
unit and ensure the cord is in safe dry location. The
defrost process may take a few hours. To speed up
the defrost time, keep the door open and place a
bowl of warm water in the refrigerator. Never use
sharp objects to remove the frost.
During the defrost cycle, water will accumulate in 2.
the drip tray. The drip tray may need to be emptied
Adjustable Interior Shelves
(Some models)
Door Features
(Some models)
during the defrost cycle. Do not leave unattended.
After defrosting is complete, empty and wipe 3.
down the drip tray, as well as the interior of the
refrigerator. You may now reset the refrigerator to
the desired temperature and put the food back in.
cARE AnD cLEAnInG