Filter
Top Products
8
Before Setting Oven Controls
Oven Vent Location
The oven vent is located below the backguard. When the oven is on, warm air is
released through this vent. This venting is necessary for proper air circulation in the
oven and good baking results. DO NOT BLOCK THE OVEN VENT.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
Removing & Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up front of rack and slide out. To
replace, fit the rack onto the guides on the oven walls. Tilt the front of the rack upward
and slide the rack back into place.
Arranging Oven Racks with 6 Rack Positions
To bake on a single rack, place the rack on position 3 or 4. To bake on 2 racks, place
the racks on positions 3 and 5.
Oven Control Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various functions of the oven as described below.
BROIL PAD— Used to
select the variable broil
function.
UP and DOWN ARROW
PADS— Used along with
the function pads to select
oven temperature, time of
day, clean time and minute
timer.
BAKE PAD—Used to
select the bake function.
CLOCK SET PAD— Used to
set the time of day.
CLEAR/OFF — Used to clear any function previously
entered except the time of day and minute timer. Press
CLEAR/OFF to stop cooking.
TIMER ON/OFF PAD— Used to set or
cancel the minute timer. The minute
timer does not start or stop cooking.