Filter
Top Products
15
4. Press
(for 2 hour Self-Clean time) or (for 3
hour Self-Clean time).
5. Press the or pad. The time selected in step 4
above should appear in the display.
As soon as the controls are set, the motor driven lock
will begin to close automatically and the “LOCK”
indicator light will flash. DO NOT open the oven door
while the light is flashing (it takes about 15 seconds for
the oven door to lock).
6. "CLn" will appear in the display during the Self-Clean
cycle and the "LOCK" light will glow until the Self-
Cleaning cycle is complete or cancelled and the oven
temperature has cooled.
Self-Cleaning (cont’d)
When the Self-Clean Cycle has Completed:
1. The time of day or "End" will appear in the display
window and the “Clean” and "LOCK" light will continue
to glow.
2. Once the oven has cooled down for about 1 HOUR and
the "LOCK" light has gone out, the oven door can be
opened.
3. If “End” is in the display and the Clean indicator light
remains ON, press . The time of day will appear in
the display.
NOTE: When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning
cycle:
1. Press .
2. Once the oven has cooled down for about 1 HOUR and
the "LOCK" light has gone out, the oven door can be
opened.
3. Restart the Self-Clean cycle once all conditions have
been corrected.
To avoid possible burns use care when opening
the oven door after the Self-Cleaning cycle. Stand to the side
of the oven when opening the door to allow hot air or steam to
escape.
DO NOT force the oven door open. This can
damage the automatic door locking system. Use caution and
avoid possible burns when opening the door after the Self-
Cleaning cycle has completed. The oven may still be VERY
HOT.
Adjusting Your Oven Temperature
Note: Oven temperature adjustments made will not change
the Self-Cleaning feature temperature.
Your oven control has been precisely set at the factory. This
setting may differ from your previous oven however, so your
recipe times may not give you the results you expect. If you
think that the oven is cooking too hot or too cool for your recipe
times, you can adjust the control so that the oven cooks hotter
or cooler than the temperature displayed.
To Adjust Oven Temperature:
1. Press .
2. Set the temperature to 550°F (287°C) by pressing and
holding the .
3. Within 2 seconds, press and hold until the 2 digit
display appears. Release . The display now indicates
the amount of degrees offset between the original factory
temperature setting and the current temperature setting. If
the oven control has the original factory calibration, the
display will read "0."
4. The temperature can now be adjusted up or down 35°F
(17°C), in 5°F steps by pressing and holding the or
. Adjust until the desired amount of offset appears in
the display. When lowering the oven temperature, a minus
sign (-) will appear before the number to indicate that the
oven will be cooler by the displayed amount of degrees.
5. When you have made the desired adjustment, press
to go back to the time of day display.