Frigidaire 316901213 Range User Manual


 
11
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.
OVEN CONTROL FUNCTIONS
Up and down arrow pads— Use with the
feature or function pads to set oven
temperature, bake time, start time, clean time
(when programming an automatic start time),
setting or adjusting the clock and minute timer.
Broil pad— Use to select
the variable broil feature.
Bake pad—Use
to select the bake
feature.
Start time pad
Use to set the
desired start time
for baking & Self-
Clean. May be used
with bake time to
program a delayed
timed bake.
Bake time pad— Use
to enter the length of
baking time desired.
Clean pad— Use to set a
Self-Clean cycle.
Oven, preheat & door locked lights* — The "oven" light
will glow each time the oven turns on to maintain the set oven
temperature. The "preheat" light will glow when the oven is
first set to operate, or if the desired temperature is reset higher
than the actual oven temperature. The "door locked" light will
flash when the oven door locks and unlocks, the oven door
lockout is active or when the self-clean cycle feature is active.
Feature indicator
lights— These
indicator lights show
which feature is active.
Clock pad— Use to
set the time of day.
Clear off pad— Use to
clear any feature
previously entered except
the time of day and
minute timer. Press clear
off to stop cooking.
Also use clear off to
activate oven lockout
feature.
Timer on-off pad
Use to set or cancel
the minute timer. The
minute timer does not
start or stop cooking.
Timer on-off pad is
used to set the
continuous bake
function.
Setting the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clock for the correct time of day before using the appliance.
The clock cannot be changed when the oven is set or
clean is active.
NOTE
To set the clock
1. Press clock once (do not hold key pad down).
2. Within 5 seconds, press and hold the or until
the correct time of day appears in the display.
SETTING OVEN CONTROLS
To change the temperature display mode from °F to
°C (Celsius) or from °C to °F (Fahrenheit)
1. Press broil. "— —" appears in the display.
2. Press and hold the until "HI" appears in the
display.
3. Press and hold broil until °F or °C appears in the
display.
4. Press the or to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
The temperature display mode cannot be changed when
the oven is set or clean is active.
NOTE
Changing the temperature display mode
(°F or °C)
The display may be changed to show or Fahrenheit or
Celsius oven temperatures.The oven control is set to display
°F (Fahrenheit) when shipped from the factory.