Filter
Top Products
General 13 Information
HOT SURFACE INDICATOR LIGHT
(some models)
Some models have an indicator light located on the ceramic glass cooktop that glows
as soon as the glass begins to warm up. When the heating unit is turned off, it will
continue to glow as long as the glass remains warm enough to cause burns. Other
models have 4 hot surface indicators (one per element) arranged in a cluster. Their
location is as shown in the illustration above.
SETTING WARM ZONE CONTROLS (some models)
To Operate the Warm Zone
Your range is equipped with a warm zone. The purpose of the warm zone is to keep hot cooked foods at serving temperature. Always start
with hot food. It is not recommended to heat cold food on the warm zone.
All food placed on the warm zone should be covered with a lid or aluminum foil to maintain quality. For best results, when warming pastries
or breads, the cover should have an opening to allow moisture to escape. Do not use plastic warp to cover food. Plastic may melt onto
the surface and be very difficult to clean.
Use only dishware, utensils and cookware recommended for oven and cooktop use on the warm zone.
Unlike the surface elements, the warm zone will not glow red when it is hot.
Always use potholders or oven mitts when removing food from the warm zone as cookware and plates will be hot.
Indicator Lights
The surface indicator light is located below the warm zone control. It turns on when the control is set, and
stays on until the control is turned off. The hot surface indicator light, located under the glass cooktop,
will come on when the control is set and will continue to glow until the glass cooktop has cooled down to
a moderate level.
To Set the Warm Zone Control
1. To set the control, push in and turn the knob. The temperatures are approximate, and are designated by HI, MED
and LO. However, the control can be set at any position between HI and LO for different levels of heating.
2. When done, turn the control to OFF. The warm zone will remain warm until the hot surface indicator light goes
off.
Temperature Selection
Refer to the chart for recommended heating levels. If a particular food is not listed, start
with the medium level, and adjust as needed. Most foods can be kept at serving
temperatures by using the medium level.
Ceramic Glass Cooktop (some models) (continued)
Indicator
Light
Warm Zone Recommended Food Settings
Chart
Food Item Heating
Level
Breads/Pastries LO
Casseroles LO
Dinner Plates with Food LO
Eggs LO
Gravies LO
Meats MED
Sauces MED
Soups (cream) MED
Stews MED
Vegetables MED
Fried Foods HI
Hot Beverages HI
Soups (liquid) HI
Use the warm zone to keep cooked foods hot such as: vegetables, gravies, casseroles, soups, stews, breads, pastries and oven-safe dinner.
Warm & Serve Zone
Hot Surface Indicator Light