Frigidaire 318205852 Range User Manual


  Open as PDF
of 36
 
17
SETTING OVEN CONTROLS
NOTE
After 6 minutes, the convection fan will be activated during the rst rise of temperature to allow the oven to reach its
target temperature faster.
SETTING POWER PREHEAT
The PREHEAT pad controls the Power Preheat
feature. The Preheat feature will bring the oven up
to temperature and then indicate when to place the
food in the oven. Use this feature when recipes call for
preheating. Preheating is not necessary when roasting
or cooking casseroles. The oven can be programmed to
preheat at any temperature between 170°F to 550°F
(77°C to 288°C). Some food with short cooking duration
may need more cooking time.
TosetthePreheattemperaturefor375°F
1. Arrange the interior oven racks.
2. Press PREHEAT. “350” will appear in the display. If a
preheat of 350°F is needed, press START.
3. Press375.
4. Press START. “PRE” will be displayed while the oven is
preheating.
5. Press CANCEL when baking is complete or to cancel
the preheat feature.
NOTE
After the oven has reached the desired temperature (this
example, 375°F) the control will beep and the “PRE” light
will turn off, the BAKE feature will activate and oven target
temperature will be displayed. If you missed hearing the
beep, you can tell that the oven has reached preheat
temperature if you see the oven temperature showing in
the oven display. Once the oven has preheated, place
foodintheoven. The preheat temperature can only be
changed while the “PRE” message is displayed.
TochangePreheattemperaturewhileovenis
preheating(ex:changingfrom375°Fto425°F)
If it is necessary to change the preheat temperature
while the oven is preheating to the original temperature:
1. While preheating, press PREHEAT. “375” will
appear in the display.
2. Enter the new preheat temperature. Press 425.
3. Press START. “PRE” will be shown in the display.
Note: A beep will sound once the oven temperature reaches
425°F and the display will show “425°”.
4. When baking is complete press CANCEL.
SETTINGBAKE
The BAKEpad controls normal baking. If a rapid
preheating is preferred, refer to the Power Preheat
feature for instructions. The oven can be programmed to
bake at any temperature from 170°F to 550°F (77°C to
288°C).
BakingTips:
• Preheat your oven before using the bake mode.
• During preheat, the bake burner only is used to heat
the oven.
• Use only one rack and center the pans as much as
possible on rack 2 or 3.
• If using two racks, place the oven racks in positions 1
and 3.
• Allow 2” to 4” (5,1 to 10,2cm) around the utensil(s)
for proper air circulation.
• Be sure the pans do not touch each other, the door,
sides or back of the oven.
TosettheBakeTemperatureto375°F
1. Arrange interior oven racks.
2. Press BAKE, “350” will appear in the display. If a
bake of 350°F is needed, press START.
3. Press 375.
4. Press START. The actual temperature will be
displayed. A beep will sound once the oven
temperature reaches 375°F and the display will show
“375°”.
5. Place food in the oven.
NOTE
Pressing CANCEL will stop the feature at any time.
TochangetheBakeTemperature
(example:changingfrom375°Fto425°F)
1. After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to
425°F, press BAKEand “375” will appear in the
display.
2. Press 425.
3. Press START.
 previous next