Filter
Top Products
14
Getting Water While Dishwasher is
Running
You can get water from the faucet while the
dishwasher is connected. However, avoid
getting water when the dishwasher is filling or
draining.
1. Press red button on coupler to get the
water you want. The faucet is set on hot,
adjust faucet if you want cold.
2. Be sure hot water is turned back on all the
way to complete cycle.
Disconnecting the Portable/Convertible
Dishwasher
1. When cycle has finished, turn off hot water.
2. Press red button on coupler to release
water pressure being careful not to release
coupler.
3. Press down on collar to release coupler.
4. Empty remaining water from coupler and
return it to compartment.
5. Unplug power cord and return it to
compartment.
IMPORTANT: A sink spray attachment hose
can burst due to constant water pressure
while in use. If your spray hose is installed on
same water line as the dishwasher, we suggest
you disconnect the sink spray attachment and
plug the hole.
Connecting and Disconnecting the
Portable/Convertible Dishwasher (continued)
Avoid fire hazard or electrical shock.
Do not use an adapter plug, extension
cord or remove grounding prong from
electrical power cord. Failure to follow
this warning can cause serious injury,
fire or death.
Electrical Connection for a Portable/
Convertible Dishwasher
An electrical supply of 120 volts, 60 Hz, AC
only, 15 amps is required. For your safety, the
dishwasher must be grounded. If there is a
malfunction or breakdown, grounding will
reduce risk of electrical shock. This
dishwasher has a power cord with a 3-prong
grounding plug. It must be plugged into a
mating 3-prong grounding type receptacle,
installed and grounded in accordance with the
National Electrical Code and any local codes
and ordinances.
Grounding type wall receptacle
Do not under any circumstances cut, remove
or bypass the grounding prong from this plug.
Power supply cord with 3-prong grounding plug
Converting to Built-In
Your portable dishwasher can be converted to
a built-in (undercounter) model. A conversion
kit No. 154241302 is required and is available
from your local dealer or distributor.
Instructions are included with the kit.