Filter
Top Products
Manual Operation
Adding cook time (+30sec)
1.
2.
Use the number pads to enter desired
defrost time (defrost time may be set up to
99 minutes and 99 seconds).
Press START/+30sec pad.
When defrost has finished, you will hear a series of beeps.
Setting Defrost by Weight
1.
2.
Use the number pads to enter weight of
food to defrost in pounds. You may enter
Press START/+30sec pad.
When defrosting has finished, you will hear a series of
beeps.
NOTE: The weight amount must be a valid entry for this
decimal point is assumed before the last digit you enter.
Heating with multiple cooking stages
For best results, some microwave recipes call for different
power levels or different lengths of time for cooking. Your
microwave may be set to change from one stage to another
automatically (2 stages maximum).
When finished, you will hear a series of beeps.
NOTE:
1.
multiple cooking.
2. If the 1st stage is the set defrost feature, the 2nd stage
can’t be set to Defrost again. If one of the stages is
weight defrost, that will be the 1st stage when cooking
starts.
1. Press START/+30sec pad 2 times.
NOTE: The “+30sec” function is not available when using
the “weight defrost” or any of the “convenience
operation” features.
Pressing the START/+30sec pad once starts 30 seconds of
cooking at a 100% power level.
Pressing the START/+30sec pad during cooking adds 30
seconds (for each press) to the cook time..
Example: to add 1 minute of cook time at the power
level of 100%:
Example: to defrost 0.5 lbs. of food using the automatic
defrost cycle (cook time determined automatically)
Setting Defrost by Time
Example: to defrost food with the automatic defrost
cycle for 5 minutes:
10
For example, enter
0,
5 for 0.5 pounds
and enter 5 for 5.0
pounds.
Example: to cook food at 80%power for 3 minutes and
then 50% power for 6 minutes 30 seconds:
Use the number pads to enter power level
for the 1st stage. PL8 appears in the
display (80% power).
time for the 1st stage (cook time may be
set up to 99 minutes and 99 seconds).
Power Level for the
2nd stage.
time for the 2nd stage (cook time may be
set up to 99 minutes and 99 seconds).
Use the number pads to enter heating
Press
6. Use the number pads to enter heating
Press Power Level pad once for power level
START/+30sec pad.Press
10(100% power).
2.
1. Press "COOK TIMER" once."00:00" displays.
3.
4.
5.
Press "COOK TIMER" pad.
7.
for the 2nd stage. PL5 appears in the
display (50% power).
Use the number pads to enter power level
8.
9.
The “Auto Menu” can’t be set as one of
p
ad
weight from 0.3 to 6.3 pounds.
3.
feature to start. A valid weight entry is 0.3 to 6.3 pounds A
p
ad
3.
Press
Defrost Weight
Press
Defrost Time