Frigidaire FFSC2323LP Refrigerator User Manual


  Open as PDF
of 27
 
23
Care & Cleaning Tips
Part What To Use Tips and Precautions
Interior & Door
Liners
• Soap and water
• Baking soda and water
Use two tablespoons of baking soda in
onequartofwarmwater.Be sure to
wring excess water out of sponge or
cloth before cleaning around controls,
light bulb or any electrical part.
Door Gaskets • Soap and water Wipe gaskets with a clean soft cloth.
Drawers & Bins • Soap and water Use a soft cloth to clean drawer runners
and tracks.
Glass Shelves • Soap and water
• Glass cleaner
• Mildliquidsprays
Allow glass to warm to room temperature
before immersing in warm water.
Toe Grille • Soap and water
• Mildliquidsprays
• Vacuum attachment
Vacuum dust from front of toe grille.
Remove toe grille (see Installation
Instructions). Vacuum backside, wipe with
sudsy cloth or sponge. Rinse and dry.
Exterior &
Handles
• Soap and water
• Non Abrasive Glass
Cleaner
Do not use commercial household
cleaners containing ammonia, bleach or
alcohol to clean handles. Use a soft cloth
to clean smooth handles. DO NOT use a
dry cloth to clean smooth doors.
Exterior &
Handles
(Stainless Steel
Models Only)
• Soap and water
• Stainless Steel Cleaners
Never use CHLORIDE or cleaners
with bleach to clean stainless steel.
Clean stainless steel front and handles
with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a
soft cloth. Use a non-abrasive stainless
steel cleaner. These cleaners can be
purchased at most home improvement or
major department stores. Always follow
manufacturer’s instructions. Do not use
household cleaners containing ammonia
or bleach.
NOTE: Always clean, wipe and dry
with the grain to prevent scratching.
Wash the rest of the cabinet with warm
waterandmildliquiddetergent.Rinse
well, and wipe dry with a clean soft cloth.
Replacing Light
Bulbs
• Unplug refrigerator
• Wear gloves
• Remove light cover
• Replace old bulb
• Replace light cover
• Plug in the refrigerator
CAUTION: Wear gloves when
replacing light bulbs to avoid getting
cut.
Use same wattage when replacing bulb.
CARE & CLEANING
 previous next