Frigidaire FGBD2438PW Dishwasher User Manual


 
4
DISHWASHER FEATURES
1. Load dishwasher
2. Add detergent
3. Add rinse aid
4. Select desired CYCLE. The indicator light above the
pad will glow when selected.
5. Select desired OPTIONS. The indicator light above
the pad will glow when selected.
6. Run hot water faucet nearest dishwasher until water
is hot. Turn water off.
Heating Element
Glass Trap
Rinse Aid
Dispenser
Nozzle and Upper Spray Arm
Tub Gasket
Middle Spray Arm
Blade Spray
TM
Detergent Dispenser
Vent
Top Rack
Serial Label
(located on right
side of tub)
Bottom Rack
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces.
Next, the dishwasher fills with water covering the filter area. Water is then pumped through the spray arms onto the
dishware. Soil particles go down the drain as the water is pumped out and replaced with clean water. The number of
water fills will vary with the cycle being used. Features may vary by Model.
Silverware
Basket
Cup Shelves
Overfill Protector
Bowl Tines
7. To start, press START/CANCEL pad.
8. Close door to latch.
Getting Started
NOTE
To customize your dishwasher to match your cabinets
You will need a trim kit.
See Step 10 of Installation Instructions that came with
dishwasher for more information.