Filter
Top Products
Accessories information available
on the web at frigidaire.com
Drop-In Gas Cooktops (Version 2)
(Callouts MUST be charted per individual model).
Professional / Gallery / Baseline
BASED ON INSTALL GUIDE
VERBIAGE (VERSION 2)
(G) min. between
rear
edge of cutout and adjacent
combustible surface
(or backsplash)
BASED ON INSTALL GUIDE
VERBIAGE (VERSION 2)
(G) min. between
rear
edge of cutout and adjacent
combustible surface
(or backsplash)
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
FGGC3045K 01/12 © 2012 Electrolux Home Products, Inc.
Specifications
subject to change.
Built-In Cooktops
FGGC3045K S/W/B 30" Gas
Built-In Cooktop Specifications
•
Product Shipping Weight (approx.) – 55 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.
•
Amps @ 120 Volts = 1.0 Amps
•
Always consult local and national electric and gas codes.
•
Cooktop cutout height includes clearance needed beneath cooktop
to allow for gas supply connection. Recommended location for
grounded 120V outlet is on rear wall in an 8"-wide by 10"-high area,
positioned 22" above floor surface and 4" from right side of cooktop
centerline. Access to underside of cooktop and junction box must
be provided for inspection and service.
•
Cooktop ships with 3/4" factory regulator.
•
LP Gas conversion kit supplied.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than 30".
•
Allow 30" minimum clearance between top of cooktop platform and
bottom of unprotected wood or metal overhead cabinet.
•
Allow 2" minimum distance between rear edge of cutout and adjacent
combustible surface (or backsplash).
•
Allow 7" minimum required clearance from left edge of cooktop to
adjacent combustible surface and 7" minimum from right edge of
cooktop to adjacent combustible surface.
•
Installation of drawer beneath cooktop requires 6-1/2" minimum
clearance beneath countertop surface, and assured clearance for gas
and electrical connections.
•
To reduce risk of fire when using overhead cabinetry, install range
hood that projects horizontally a recommended minimum of 5"
beyond bottom of cabinets.
•
Gas Built-In Cooktop model FGGC3045K is approved to be used
over any Frigidaire® Electric Single Wall Oven. (Refer to Gas Cooktop
Installation Over 30" / 27" Electric Single Wall Oven Specifications
page on web.)
•
Gas Built-In Cooktop model FGGC3045K is approved to be used in
combination with Frigidaire® 30" Downdraft Vent E30DD75ESS or
PL30DD50EC. (Refer to model-specific Downdraft Vent product page
on web for detailed countertop preparation specifications.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
•
Granite Countertop Installation Kit – (PN # 903103-9010).
Product Dimensions
Required Clearances
A - Width B - Depth C - Height G (min.) H (min.) I (min.) J (min.)
30" 21-3/4" 5" 2" 7" 7" 2-1/4"
Product Cutout Dimensions
K - Cabinet Opening Width
(min.)
Utility Connection Locations
D - Width (min. - max.) E - Depth (min. - max.) F - Height (min.)* Power Supply Gas Supply
27-1/4" - 28-1/2" 19-1/8" - 19-3/4"
8" 30" Right Rear Right Rear