Filter
Top Products
13
How much Detergent to use
The amount of detergent to use depends on the water
hardness. Water hardness is measured in grains per
gallon. Using too little detergent can result in poor
cleaning and hard water filming or spotting. Using too
much detergent in soft water can cause a permanent
film called etching. Your local water company, water
softener company or county extension agent can tell you
the water hardness in your area.
The use of industrial grade detergent can damage the
heating coil and other parts of the dishwasher leading to
damage to the unit and surrounding property. Use only
household grade automatic dishwasher detergents.
CAUTION
DISHWASHER DISPENSER & DETERGENTS
Cover
Main Wash Cup
Pre Wash Cup
Cover Latch
If the cover is closed on the Main Wash Cup, open
by pressing the cover latch.
Cover
Main Wash Cup
Pre Wash Cup
Cover Latch
If the cover is closed on the Main Wash Cup, open
by pressing the cover latch.
Rinse Aid Indicator
* Apperance may vary from your model.
Rinse Aid Indicator
Power Plus
or
Normal Wash
Detergent Usage Guide
Cycle
Soft Water
(0-3 grains)
Medium Hard Water
(4-8 grains)
Hard Water
(9-12 grains)
Very Hard Water*
(over 12 grains)
2 teaspoons
(each cup–
1/4 full)
5 teaspoons
(each cup–fill to line
above "Regular")
8 teaspoons
(each cup–
completely full)
Each Cup–
Completely Full
(water softener
recommended)
Top Rack
2 teaspoons
(Main Wash cup–
1/4 full)
5 teaspoons
(Main Wash cup–fill to
line above "Regular")
8 teaspoons
(Main Wash cup–
completely full)
Main Wash Cup–
Completely Full
(water softener
recommended)
Rinse Only
No Detergent No Detergent No Detergent
No Detergent
(water softener
recommended)
NOTE
As a rule, use 1 teaspoon for each grain above 12. For very hard water, detergent alone
may not be enough and then a water softener is recommended to imporve water quality and dishwashing performance.
The HEAT DRY option in combination with rinse aid will
enhance drying performance. The energy required
to use the HEAT DRY option costs pennies per cycle.
You may choose not to select the HEAT DRY option;
however you will have items in your dish load that
will not be completely dry at the end of the cycle.