Filter
Top Products
18
AUTO COOKING
• Suppose you want to reheat 2 fresh muffins with auto
reheat.
Step Press
1. Press the auto reheat
pad and number 1 for
fresh muffin.
auto
reheat
1
2.
Repeat pressing same
number pad at Step 1 to
increase quantity.
Ex : 2 muffins.
1
x 2
3. Press the START enter
+30 sec pad.
START
enter
+30 sec
Auto Reheat
Auto Reheat chart
FOOD
AMOUNT
PROCEDURE
Use this pad to warm rolls, muffi ns, biscuits, bagels etc. Large items should be
considered as 2 or 3 regular size. Arrange on fl at plate; cover with paper towel.
For refrigerated rolls or muffi ns, it may be necessary to double the entered amount
to ensure the proper serving temperature. For example, enter quantity of 2 for 1
refrigerated muffi n. Press the auto reheat pad and number 1 to increase quantity
and press the START enter +30 sec pad.
Use this pad to warm rolls, muffi ns, biscuits, bagels etc. Large items should be
considered as 2 or 3 regular size. Arrange on fl at plate; cover with paper towel.
Press the auto reheat pad and number 2 to increase quantity and press the
START enter +30 sec pad.
Use this pad to reheat refrigerated canned or homemade pasta with sauce. For
room temperature pastas, use Less option. Pasta without sauce double the quantity
per setting. For example, measure 2 cups of cooked noodles and program for 1 cup.
Cover with lid or plastic wrap. Press the auto reheat pad, number 3 to increase
quantity and press the START enter +30 sec pad. After cooking, stir and let
stand, covered 2 to 3 minues.
This setting is good for restoring a cool beverage to a better drinking temperature.
Stir liquid briskly before and after heating to avoid "eruption". Press the auto
reheat pad, number 4 to increase quantity and press the START enter +30 sec
pad.
1. Fresh Rolls/
Muffi ns
2. Frozen Rolls/
Muffi ns
3. Pasta
4. Beverage
1 - 10 pieces
1 - 10 pieces
1 - 6 cups
0.5 - 2.0 cups
NOTES
1. Auto Reheat can be programmed with More or less
time adjustment. See page 24
.
2. Fresh rolls/muffi ns, frozen rolls/muffi ns, pasta and
beverage are same procedure. Follow the left side
procedure.
U&C 2.0 side control_UL [B320] [18 18U&C 2.0 side control_UL [B320] [18 18 2/3/12 4:54:29 PM2/3/12 4:54:29 PM