Filter
Top Products
8
Controls & Settings
NONO
NONO
NO
TETE
TETE
TE
The advanced electronic control system in your refrigerator includes additional display modes that service
professionals can use to rapidly diagnose performance issues.
ALLOWING COOLING TIME BEFORE USE
To ensure reliable food storage, allow your refrigerator and freezer to operate with the doors closed for 8 to 12
hours before placing food inside. During this cooling period, you do not need to adjust the controls, which are
preset at the factory.
SETTING COOLING TEMPERATURES
Your refrigerator comes with a state-of-the-art electronic digital control system. The system’s control panel is
located at the top of the the fresh food compartment.
The two digital displays on the left half of the control panel indicate the current settings or temperatures of your
freezer and fresh food compartments.
The models with a 2-digit temperature display are for reference only, and
do not display the current accurate compartment temperature. Should you desire to see what the current
accurate temperature is, place a separate thermometer inside the freezer or fresh food compartment in the
desired location.
To adjust the temperature to a higher or lower setting, press
the Up (Cold) or Down (Colder) button closest to the display.
The first time you press the button, the display shows current
setting you entered. Each press of the button after that changes
the setting by one.
The display shows your new setting momentarily, then
changes back to the current temperature.
(Temperature Display - Features may vary.)
(Single Digit Display - Features may vary.)