4
• Install the refrigerator in the coolest part of the room, out
of direct sunlight and away from
heating ducts or registers. Do not
place the refrigerator next to heat-
producing appliances such as a
range, oven or dishwasher.
• Level the refrigerator so the door
close tightly.
• Do not overcrowd the refrigerator or
block cold air vents. Doing so causes the refrigerator to
run longer and use more energy. Shelves should not be
lined with aluminum foil, wax paper or paper toweling.
Liners interfere with cold air circulation, making the
refrigerator less efficient, which could cause food
spoilage.
• Cover foods and wipe containers dry before placing
them in the refrigerator. This cuts down on moisture
build-up inside the unit.
• Organize the refrigerator to reduce door openings.
Remove as many items as needed at one time and
close the door as soon as possible.
COOL DOWN PERIOD
For safe food storage, allow 4 hours for the refrigerator to
cool down completely. The refrigerator will run continuously
for the first several hours.
TEMPERATURE CONTROL
The temperature control is located inside the refrigerator and
in the freezer compartment on some models. The temperature
is factory preset to provide satisfactory food storage tempera-
tures. However, the temperature control is adjustable to
provide a range of temperatures for your personal satisfaction.
To adjust the temperature colder in the refrigerator
compartment, turn the refrigerator Cold Control knob towards
a higher number. To adjust the temperature colder in the
freezer compartment, move the Cold Control knob towards a
higher number. After each movement, allow 24 hours for the
unit to adjust. If the unit is still not cold enough, repeat until
desired temperature is achieved. After each movement of the
control knob, allow the unit to adjust for 24 hours.
To adjust the temperature warmer in the refrigerator
compartment, turn the refrigerator Cold Control knob towards
a lower number. To adjust the temperature warmer in the
freezer compartment, move the Cold Control knob towards a
lower number. After each movement, allow 24 hours for the
unit to adjust. If the unit is still not warm enough, repeat until
desired temperature is achieved. After each movement of the
control knob, allow the unit to adjust for 24 hours.
SETTING THE TEMPERATURE CONTROL
ENERGY SAVING TIPS
REFRIGERATOR FEATURES
ADJUSTABLE INTERIOR SHELVES
Multi-position adjustable interior shelves can be moved to
any position for larger or smaller packages. The shipping
spacers that stabilize the shelves for shipping should be
removed and discarded.
SLIDE-OUT CRISPER (Some models)
A Slide-Out Crisper(some models) located at the bottom of
the refrigerator, provides separate storage space for items
that are difficult to store on refrigerator shelves. To remove
the Crisper, pull out and lift up.
AUTOMATIC FREEZE CONTROL (Some models)
The Freeze Control Feature will maintain proper interior
refrigerator temperature even when the refrigerator is
placed in an area where the surrounding temperature drops
down to 10° F (-12° C).
INTERIOR LIGHT (Some models)
The light comes on automatically when the door is opened.
To replace the light bulb, turn the temperature control to
OFF and unplug the electrical cord. Replace the old bulb
with a bulb of the same wattage.
1 Freezer Control 8 Freezer Door Bin
2 Ice Tray 9 Can Dispenser
3 Freezer Shelf 10 Refrigerator Bins (Small)
4 Refrigerator Control 11 Refrigerator Bin (Large)
5 Lamp Switch 12 Adjustable Feet
6 Refrigerator Shelf
7 Crisper
Freezer Cold Control
Refrigerator Cold Control
6
7
8
5
4