Filter
Top Products
8
To adjust the temperature to a higher or lower setting, press
the Up (Cold) or Down (Colder) button closest to the display.
The first time you press the button, the display shows current
setting you entered. Each press of the button after that
changes the setting by one.
The display shows your new setting momentarily, then
changes back to the current temperature.
TEMPERATURE CONTROLS
MAKING TEMPERATURE ADJUSTMENTS
After running your refrigerator for 24 hours, you can adjust
temperatures as needed. Make your adjustments small and
gradual, allowing time for temperatures to change and
stabilize. Refer to the following guidelines for temperature
settings.
CHOOSING FAHRENHEIT OR CENTIGRADE
Depending on which temperature standard you prefer to use,
you can set your control panel to display in fahrenheit or
centigrade. To change between fahrenheit and centigrade,
press the Mode button (located between the two digital
temperature displays).
WHAT TO DO IF THE TEMPERATURE DISPLAYS
FLASH
If either display is continuously flashing, it may indicate that the
control system has detected a performance problem. Call your
Electrolux service representative, who can interpret the
flashing message.
Numeric Display
Freezer
Fresh
Food
Warmest 1 1
Factory Setting 6 6
Coldest 9 9
Temperature Display (2-Digit)
Freezer Fresh Food
F° C° F° C°
Warmest 6° -14° 47° 8°
Factory Setting 0° -18° 37° 3°
Coldest -6° -21° 33° 1°
Temperature Adjustment Guide
If Fresh Food compartment is too warm
Adjust Fresh Food control one degree
colder by pressing Down (Colder) button.
If Fresh Food compartment is too cold
Adjust Fresh Food control one degree
warmer by pressing the Up (Cold) button.
If Freezer compartment is too warm
Adjust Freezer control one degree colder
by pressing Down (Colder) button.
If Freezer compartment is too cold
Adjust Freezer control one degree warmer
by pressing the Up (Cold) button.
Press to alternate between
Fahrenheit and Centigrade