Frigidaire GLRT188WDLB Refrigerator User Manual


 
12
WATER DISPENSER
Your refrigerator includes an automatic water dispenser on
the front of the refrigerator door. The dispenser is designed
to accommodate containers up to 7½ inches high.
How the Water Dispenser Works
The water tank, located inside the refrigerator door,
automatically fills as water is dispensed. For proper
dispenser operation, the recommended supply water
pressure should fall between 20 psi and 100 psi.
Water Dispenser & Ice Service
After the refrigerator is connected to the water supply, fill
the water tank by drawing one glass of water. It may take
about 1½ minutes after activating the dispenser button
before water begins to fill this first glass. Continue flushing
the system for 3 minutes to rid the tank and plumbing
connections of any impurities.
Water pressure must not exceed
100 lbs. Excessive pressure may
cause water filter to malfunction.
Dispensing Water
To operate the water dispenser, press a drinking glass
against the dispensing button. Hold the glass as far up as
possible, ensuring that the water dispensing spout is inside
the lip of the glass.
To stop dispensing water, pull the glass away from the
dispensing button. For colder water, first add ice to your
drinking glass.
Drip Tray
The drip tray located at the base of the dispenser catches
small spills and allows them to evaporate. This tray is
removable for easy cleaning.
NOTE: Please do not pour excess water or ice into the
drip tray. It does not have a drain.
Dispenser Lock
The water dispenser includes a switch that allows you to
disable the water dispenser. You can use this lock to prevent
accidental spills, such as those caused by children pressing
the dispensing button without a glass. The switch is located
below the locked/unlocked symbols on the dispenser face
plate.
Water Dispenser
Dispensing
Button
Drip Tray
Dispensing
Spout
Dispenser
Lock
Dispenser Lock