Filter
Top Products
9
Fig
Be sure lights are cool before cleaning the hood.
To Clean FiltersTo Clean Filters
To Clean FiltersTo Clean Filters
To Clean Filters
••
••
• The metal grease filters will last forever.
They are made of anodized aluminum
••
••
• It is recommended that the filters be washed at least once a month; they
can be washed by hand or in the dishwasher.
• Drain water through edge holes and let each filter dry thoroughly before
replacing it.
To Remove The Metal Grease FiltersTo Remove The Metal Grease Filters
To Remove The Metal Grease FiltersTo Remove The Metal Grease Filters
To Remove The Metal Grease Filters
• Turn blower and lights off.
• Push each handle towards the center and pull downwards Figure 8.
To Replace The Metal Grease FiltersTo Replace The Metal Grease Filters
To Replace The Metal Grease FiltersTo Replace The Metal Grease Filters
To Replace The Metal Grease Filters
• Reverse procedure.
To Clean Hood SurfaceTo Clean Hood Surface
To Clean Hood SurfaceTo Clean Hood Surface
To Clean Hood Surface
• For general care, wipe the outside of the stainless steel, white, black or
glass hood with sudsy water or household cleaners such as Fantastic® or
Formula 409
®
, rinse well and dry with clean soft cloth to avoid water
marks.
• Wipe and dry brushed stainless steel in the same direction as the grain.
• Do not use abrasive products.
• To remove finger prints and give added shine use spray cleaners such as
Stainless Steel Magic
®
and Shimmer
®
.
Hood CleaningHood Cleaning
Hood CleaningHood Cleaning
Hood Cleaning
NOTE:
Turn blower and lights off. Make sure the lights are cool.Turn blower and lights off. Make sure the lights are cool.
Turn blower and lights off. Make sure the lights are cool.Turn blower and lights off. Make sure the lights are cool.
Turn blower and lights off. Make sure the lights are cool. If new
lights do not operate be sure lights are inserted correctly before calling
service.
• Unscrew the light cover.
• Remove the damaged light and replace with a new 12 Volt, 20 Watt
(maximum) halogen light made for a G-4 base. Follow package directions
and do not touch new light with bare hands.
• Reinstall the light cover.
Lights replacementLights replacement
Lights replacementLights replacement
Lights replacement
Figure 9Figure 9
Figure 9Figure 9
Figure 9
Figure 9Figure 9
Figure 9Figure 9
Figure 9
Figure 8Figure 8
Figure 8Figure 8
Figure 8