Filter
Top Products
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
Forsatisfactory use of your oven, become familiar with the various pad features and functions of the oven asdescribed below.
Feature indicator lights--
These indicator lights show if
bake or broil is active.
Bake pad--Use to select the
bake feature.
Broil pad-- Use to select the
variable broil feature.
bake .......... A __
Up and down arrow
pads-- Use with the
feature or function
pads to set oven
temperature or
adjusting the clock and
minute timer,
Timer on-off pad-- Use to set or cancel the
minute timer, The minute timer does not start or
stop cooking.
Clock pad-- Use to
set the time of day.
Clear off pad-- Use to clear any feature
previously entered except the time of day and
minute timer. Press clear off to stop cooking.
Setting the dock
When the appliance isfirst plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clockfor the correct time of day before using the appliance.
To set the clock:
1. Press clock once (do not hold key pad down).
To change the temperature display mode from °F to
°C (Celsius) or from °C to °F (Fahrenheit).
.
Press and hold broil (for 6-8 seconds) until For C
appears in the display. At this time the display will show
the current temperature display mode whether set for F
or C. Before proceeding read the notes below.
2. Within 5 seconds, press and hold the A or V until
the correct time of day appears in the display.
Changing the temperature display mode
(°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The display may be
changed to show either Fahrenheit or Celsius oven
temperatures.
.
.
.
Press either A or V key pad to toggle between F
(Fahrenheit) or C (Celsius) mode choices.
To accept the change, wait until the oven control
provides the acceptance beep (See Notes below).
The display will return to the time of day with the
temperature display mode changed the next time the
oven is set for bake or broil.
• If at any time during the process of changing the
temperature display mode you decide not to change
the mode, press the clear off key pad once before the
acceptance beep.
• The temperature display mode cannot be changed
when bake or broil isactive.