Frigidaire TMV151F Microwave Oven User Manual


 
Manual Operation
11
DEMONSTRATION MODE
You can use the Demonstration mode to see how your
microwave oven operates without the oven heating.
Touch 0 pad and 1 pad at the same time.
To turn demo mode off, repeat step 1 above.
MORE/LESS
The More(9)/Less(1) pads allow you to adjust pre-
set cooking times. They only work in the Reheat, Auto
Cooking, Add 30 sec, Time Cook modes. Use the More(9)/
Less(1) pads only after you have already begun cooking
with one of these procedures.
1. To ADD more time to an automatic
cooking procedure: Touch the More(9)
pad.
2. To REDUCE the time of an automatic
cooking procedure: Touch the Less(1)
pad.
COOKING AT HIGH POWER LEVELS
Example: To cook food for 8 minutes 30 seconds at
100% power.
1. Enter the cook time.
2. Touch ENTER/ START pad.
When the cook time is over, you will hear four beeps and
End will display.
COOKING AT LOWER POWER LEVELS
HIGH power cooking does not always give you the best
results with foods that need slower cooking, such as
roasts, baked goods, or custards. Your oven has 9 power
settings in addition to HIGH.
Example: To cook food for 7 minutes 30 seconds at
70% power.
1. Enter the cook time.
2. Touch Power Level pad.
3. Enter the power level.
4. Touch ENTER/ START pad.
When the cook time is over, you will hear four beeps and
End will display.
See cooking guide for Power levels, page 12.
COOKING WITH MORE THAN ONE
COOK CYCLE
For best results, some recipes call for one Power Level
for a certain length of time, and another Power Level for
another length of time.Your oven can be set to change
from one to another automatically, for up to three cycles at
the first cycle is defrost.
Example: To cook food for 3 minutes at 90% power
and then 70% power for 7 minutes 30 seconds.
1. Enter the first cook time.
2. Touch Power Level pad.
3. Enter the power level.
4. Enter the second cook time.
5. Touch Power Level pad.
6. Enter the power level.
7. Touch ENTER/ START pad.
When the cook time is over, you will hear four beeps and
End will display.