Filter
Top Products
2-16
2.2.4 Programming for Potato Wedges (cont.)
9
10
11
12
Computer displays
PREALM 2.
Press PROG SCAN
button to advance to
Exit Cycle program
mode.
Computer displays EX-CYCLE in the left display
and SET--TEMP in the right display.
Press ENTER button to save default setting of
SET--TEMP.
Computer displays INTERVAL in the left display
and PROD 4 or 5 in the right display.
Press TEMP button to exit Product #4 or
5 programming.
Press ON/OFF button to exit
programming mode.