Model#___________
CSI Section 11400
F rymaster
™
®
E
4
EPRI Electric Fryers
15.6
[397]
45.3
[1149]
25.9
[657]
36.6
[929]
31.0
[786]
14.1
[358]
CORDSET
LOCATION
3.7
[95]
CORDSET
LOCATION
8.3
[212]
TOP VIEW
FRONT VIEW SIDE VIEW BACK VIEW
We reserve the right to change specifications appearing in this bulletin without incurring any obligation for equipment previously or subsequently sold.
8700 Line Avenue 71106
P. O. Box 51000 71135-1000
Shreveport, LA USA
Tel: 318-865-1711
Tel: 1-800-221-4583
Fax: 318-868-5987
E-mail: info@frymaster.com
www.frymaster.com
Bulletin No. 818-0315 2/07
Litho in U.S.A. ©Frymaster, L. L. C.
MODEL
NO.
SIZE
NET
WEIGHT
DRAIN
HEIGHT
SHIPPING INFO
HEIGHT WIDTH DEPTH WEIGHT CLASS CUBE DIMENSIONS
RE14TC , RE14-2TC
RE17TC, RE17-2TC
RE22TC, RE22-2TC
45.30”*
(1149 mm)
15.6”*
(397 mm)
31.0”*
(786 mm)
150 lbs.
(68 kg)
10.5”
(267 mm)
190 lbs.
(86 kg)
85 21.31 H
46.50”
(1181 mm)
W
22”
(559 mm)
L
36”
(914 mm)
DIMENSIONS:
POWER REQUIREMENTS (SINGLE FRYERS ONLY):
*without basket lifts
MODEL
NUMBER
SHORTENING
CAPACITY
(MIN.-MAX.)
INPUT
KW
NOMINAL AMPS PER LINE
208V
3 PHASE
(3 WIRE)**
240V
3 PHASE
(3 WIRE)**
220/380V
3 PHASE
(4 WIRE)**
230/400V
3 PHASE
(4 WIRE)**
240/415V
3 PHASE
(4 WIRE)**
RE14TC 40-50 lbs.
(20-25 liters)
14 39 34 22 21 20
RE14-2TC 20-25 lbs.
(10-12 liters)
7 39 34 22 21 20
RE17TC 40-50 lbs.
(20-25 liters)
17 48 41 26 25 24
RE17-2TC 20-25 lbs.
(10-12 liters)
8.5 ea.
side
48 41 26 25 24
RE22TC 40-50 lbs.
(20-25 liters)
22 61 53 34 32 31
RE22-2TC 20-25 lbs.
(10-12 liters)
11 61 53 34 32 31
HOW TO SPECIFY
RE14TC Full pot, solid state computer controls
RE14-2TC Split pot, solid state computer controls
RE17TC Full pot, solid state computer controls
RE17-2TC Split pot, solid state computer controls
RE22TC Full pot, solid state computer controls
RE22-2TC Split pot, solid state computer controls
SD Stainless steel pot, door , enamel cabinet
SC Stainless steel pot, door and cabinet
SE Stainless steel pot, door and cabinet ends
**plus ground wire For electrical connections, use an approved, flexible, metallic or
rubber covered, electrical cable and plug with copper wire only.
No cord or plug available per UL197-9.
NOTES
CORD is provided on 3 phase
units with exception of items
in red (see chart on left).
Plug is optional on units
shipping with cord; Canada is
an exception and cords, where
available, must have a plug
attached.
Single phase units must be
field wired. no cord or plug
provided. Check electrical
codes for proper supply line
sizing.
CE Voltage: 230/400/50/3
CLEARANCE INFORMATION
A minimum of 24" (610 mm)
should be provided at the front
of the unit for servicing and
proper operation, and 6"
(152mm) between the sides
and rear of the fryer to any
combustible material.