Filter
Top Products
7
3
Run house wiring between service panel and hood location.
4
Prepare the range hood unit.
In case of Vertical Discharge
(1) The range hood is supplied with the
exhaust pipe fixed on its top plate.
(2) Provide a transition duct (not
supplied) to connect the exhaust
pipe and external duct. For the size
of transition duct, refer to Fig. at
right.
(3) Be sure to keep 1-3/16" overlapping
length of the exhaust pipe and
transition duct when installing.
(4) Skip to page 9 for mounting the
range hood.
INSTALLATION (continued)