Filter
Top Products
9
INSTALLATION (continued)
2
Remove 4 screws which are fixed to the front cover. The front cover swings open
90° as shown in Fig.
CAUTION
Do not detach the front cover from the range hood unit. The hinge may be damaged.
3
Align 4 screw holes of the liner and range hood unit, then fix securely using the
supplied screws and nuts.
NOTE
Fasten all screws and nuts evenly.
4
Make the duct joint secure and air tight
using non-flammable tape such as duct
tape, etc. (not supplied)
NOTE
Make sure that the shutter installed in
the exhaust pipe moves freely.