Fujioh ECW-300 Ventilation Hood User Manual


 
7
Knob
Filter
disassembling
1
Rectifier Baffle Panel
After loosening 2 screws fixing the
rectifier baffle panel, slide the panel to
dislocate the keyholes from the screws.
Then, open the panel a little and pull it
to remove from the catches.
NOTE: As the rectifier baffle panel may
have grease built-up, be careful
about oil-drips when removing it.
2
Filter
First, turn the knob counter-clockwise,
then detach the filter with sliding it in
the direction of the arrow to disengage
from the groove.
cleaning
Filter
After immersing the filter in water with a mild
detergent for 30 to 40 minutes, wash it with
a toothbrush or the like to remove dirt. Clean
the filter frequently to avoid grease
contamination and grease build-up, which
is difficult to clean.
Enclosure/Rectifier Baffle Panel
After wiping the enclosure and rectifier baffle
panel off with a cloth immersed in a mild
detergent, wipe off moisture thoroughly with
a dry cloth.