Gaggenau EB 271 Range User Manual


 
32
6.1 General
6.2 Replacing the lamp
The appliance must always be disconnected from
the mains when being repaired.
If the appliance does not function correctly, check
the fuses first.
If the power supply is functioning correctly, but
your appliance still does not work, please contact
your dealer or your local Gaggenau customer
service agency. Specify the appliance type (see
rating plate).
Repairs may only be carried out by authorised
electricians, in order to guarantee the safety of the
appliance.
Unauthorised tampering with the appliance will
invalidate any warranty claims.
Replacing the lamp
You can obtain spare lamps (Order No. 157312)
from Gaggenau Customer Service or a dealer. We
recommend that you use these lamps only.
Proceed as follows:
Disconnect fuses
Remove one of the lamp cover screws. Unscrew
the grill heating element partly or completely
if you have problems unscrewing the cover.
Swivel the cover to the side.
Caution: in certain circumstances, the lamp
cover may still be hot.
Push the lamp to the side by about 4-5 mm.
The lamp can now be titled down and removed.
Insert the lamp in the reverse order. Swivel the
cover back to its original position and screw it
on. (Caution: Secure the seal properly!)
If you have removed the grill heating element,
also screw it down again.
6. Maintenance
Note: do not touch the halogen lamp with your
hands. Use a cloth and only touch the edges of the
lamp.
Fig. 48
Fig. 49