Filter
Top Products
appliance has cooled down sufficiently, check this
burner to see if all the burner parts have been
assembled correctly. Check if the burner or the
electrode has been soiled (see trouble shooting
guide on page 16).
Note: if a malfunction occurs on one burner, you
can continue using the remaining burners, however,
you must turn all control knobs to the off-position
first, before recommencing.
Please note when switching on the cold
appliance on the HIGH setting: depending on
the gas type and pressure, it is possible that the
electrode continues to fire, although there is a
flame visible, and then switches off.
Turn all control knobs to the OFF position. Then
turn the control knob for the required cooking
position to any setting except the high position and
leave to warm up for 30 to 60 seconds.
Then you can continue to use your appliance as
usual.
Switching off
Fully turn the control knob to the OFF position.
The electronics of the appliance switch the gas
supply off, if all control knobs are in the off position.
8