Filter
Top Products
2.3 Operating principle
The appliance features one-hand operation. That
is to say, the ignition is activated when the control
knob is pressed briefly.
After igniting, keep the control knob pressed for
around 5-8 seconds more because the heat sensor
that opens the gas channel has to warm up first.
The gas hob has 1 normal burner (front burner)
and 1 high-intensity burner (rear burner).
All burners have a thermal protection device that
prevents unburned gas from escaping in the open
position.
The total rated thermal load amounts to:
16000 BTU (4.7 kW) referred to H
s
* (gross calorific
value)
14300 BTU (4.2 kW) referred to H
i
(calorific value)
The specified rated load is defined by installation
of the fixed nozzles.
The gas hob is converted to a different gas
type by nozzle replacement (full and low-burning
nozzles) (see nozzle table on p. 12).
The symbols on the control panel mean:
0 Off
High setting
Low setting
The flame is infinitely variable between high and
low-setting.
Maintenance Instructions
– Keep appliance area clean and free from
combustible materials, gasoline and other
inflammable vapors and liquids.
– Do not obstruct the flow of combustion and
ventilation air.
– Visually check burner flames with this pictorial
representation (see figure 4).
8
Fig. 4
High
Off
Low