GE 10 Refrigerator User Manual


 
7
Consumer SupportTroubleshooting Tips
Operating Instructions
Safety Instructions Installation Instructions
GEAppliances.com
Light Bulb Replacement
The light bulb is located at the top of the
fresh food compartment just behind the
temperature control.
To replace the bulb:
Unplug the refrigerator.
Unscrew the bulb and replace with
a same-size, same-type bulb.
Plug the refrigerator back in.
CAUTION:
Setting the fresh food control
to
OFF
does not remove power to the
light circuit.
Beneath the Refrigerator
In the refrigeration process, it is
normal that heat be expelled in the
area under the refrigerator. Some
synthetic floor coverings will discolor
at these normal and safe operating
temperatures. Your floor covering
supplier should be consulted if you
object to this discoloration.
Care should be taken in moving your
refrigerator away from the wall.
All types of floor coverings can be
damaged, particularly cushioned
coverings and those with embossed
surfaces.
When pushing the refrigerator back,
make sure you don’t roll over the
power cord.
When You Go on Vacation
For extended vacations
or absences,
remove food and unplug the refrigerator.
Clean the interior with a baking soda
solution of one tablespoon of soda to
one quart of water. Leave doors open.
For shorter vacations,
remove perishable
foods and leave the control at your
regular setting. However, if room
temperature is expected to drop below
60°F, follow the same instructions as
for extended vacations.
When You Move
Secure all loose items
such as shelves,
storage drawers and ice trays by taping
them securely in place to prevent
damage, and raise the leveling legs.
Be sure refrigerator stays in upright
position
during moving. Protect outside
of refrigerator with blanket.