Filter
Top Products
8
Setting the Timer
1. While holding the PROGRAM
button down, press and hold the
HOUR button until the hour
display begins to change. The
coffee cup icon on the left of the
display will flash to indicate you
are programming the timer. Con-
tinue to press the HOUR button
until the correct hour is displayed
for the brew time you would like
to set, noting that PM is indicated
on the left of the display.
2. While holding down the
PROGRAM button, press the
MIN button in the same way until
the desired brew time is shown.
3. After the brew time is set, press
PROGRAM again to return the
display to time of day.
4. Pressing the PROGRAM button
toggles the timer on and off. The
coffee cup icon indicates when
the timer is on.
To Start Brewing Coffee
Immediately
For optimal holding temperature, rinse the inside of Thermal Carafe with
warm water before brewing; empty and make sure Carafe Lid is properly
secured onto Carafe. Place Carafe securely onto coffee maker.
Press the ON/OFF button. The ON LED will illuminate as the coffee maker
begins brewing the coffee. Once the brewing cycle is complete the coffee
maker will turn OFF automatically.
Once brewing is complete, carefully remove Thermal Carafe from Base Plate.
To pour coffee, press button on Carafe Lid Handle.
To Start Brewing Coffee at the
Programmed Time
At the programmed time, the coffee maker will turn itself on automatically.
The ON light will turn on as the coffee maker begins brewing and coffee will
begin flowing into the Thermal Carafe. Once the brewing cycle is complete the
coffee maker will turn OFF automatically.
Once brewing is complete, carefully remove Thermal Carafe from Base Plate.
To pour coffee, press button on Carafe Lid Handle.
NOTE: The amount of coffee in the Carafe may be slightly less than the
amount of water placed in the Water Reservoir, since some of the water is
absorbed by the coffee grounds.
GE8TSDB-393 new TL 8/27/03 4:13 PM Page 8