Filter
Top Products
Troubleshooting TipsInstallation Instructions
Customer Service
Operating InstructionsSafety Information
Adding door panels.
Read these instructions completely and carefully.
Before You Begin
These instructions describe how to insert decorator panels
and what size the panels should be.
Panels Should Be Cut to the Following Dimensions:
Top freezer panel—14
5
/
16
″ x 18
3
/
4
″ (36.4 cm x 47.6 cm)
Bottom freezer panel—14
5
/
16
″ x 32
3
/
8
″ (36.4 cm x 82.2 cm)
Fresh food panel—20
1
/
16
″ x 65
3
/
16
″ (51.0 cm x 165.6 cm)
Panels that are 1/4″ (6 mm) thick will fit the door frame trim with
no special preparation. If you have a material thinner than 1/4″
(6 mm), you will need to add a filler behind the panel for proper fit.
Pre-cut white and black panels are available from your dealer.
On models with a trim kit
21
Special cut-
out required,
see below.
Special cut-
out required,
see below.
14
5
/
16
″
36.4 cm
18
3
/
4
″
47.6 cm
32
3
/
8
″
82.2 cm
14
5
/
16
″
36.4 cm
1/8″
3 mm
5/16″
8 mm
20
1
/
16
″
51.0 cm
65
3
/
16
″
165.6 cm
A cut-out is required at these outer corners,
5/16″ (8 mm) long, 1/8″ (3 mm) deep.