Filter
Top Products
To Remove the Upper Rack
Press thumb tab out and remove the
front end caps on each side of the rail.
Pull the rack straight out and off the rails.
Replace the end caps.
Push the rails all the way back into the
dishwasher.
Then fill the lower rack and begin
your cycle.
5
4
3
2
1
15
Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions
Remove end cap
Press thumb
tab out
Don’t let any
item extend through
bottom.
To remove end baskets, grasp the basket at
opposite corners and slide apart.
Three-piece basket (on some models)
One-piece basket (on some models)
Silverware Basket
To load flatware, simply push the adjustable
handle to either side (on some models). Put
flatware in the removable basket with fork
and knife handles up to protect your hands.
Place spoons in the basket with handles
down. Mix knives, forks and spoons so they
don’t nest together. Distribute evenly. Small
plastic items, such as measuring spoons and
lids from small containers should go in the
bottom of the silverware basket with the
silverware on top.
The one-piece silverware basket (on some
models) can be placed in the front, right side
or back of the lower rack.
A variety of options is available regarding
the three-piece silverware basket (on some
models) in your dishwasher. The complete
basket is designed to fit on the right side of
the lower rack. Additionally, each end of
the basket is removable to add loading
flexibility to accommodate flatware and
lower rack capacity needs.
The lids of both end and middle baskets (on
some models) can be closed to contain small
items. Long items can be placed on the utility
shelf in the upper rack.
GEAppliances.com