Filter
Top Products
4
OPERATING INSTRUCTIONS
1. Place the jar on the base, be sure the triangle on the motor aligns with “ ”
mark (see Fig. 1). Turn the jar clockwise until the triangle is aligned with the
“ ” mark (see Fig.2). The appliance cannot be activated
without the jar in correct position.
2. Add ingredients to be blended. The volume of
ingredients should not exceed the max level as
indicated on the jar.
Note:
never use boiling liquids or run the appliance empty.
3. Replace the top cover on the jar.
4. You may add ingredients into the jar through the
opening in the top cover during operation, then replace
measuring cup. Align the tabs of the measuring cup
with the grooves of the top cover. Press down and turn
the measuring cup counter-clockwise until the
measuring cup is in place.
5. Connect the plug to the wall outlet and set speed
selector to desired setting. See figure 3 for detailed
information of the speed selector.
Note: Make sure the top cover is placed in position
completely before operating, and never open
the top cover during operation.
6. The maximum run time is 1 minute. The minimum rest time is 2 minutes.
The appliance must rest for 30 minutes every 10 cycles.
7. Turn the Speed Selector to the “0” position once the ingredients have been
blended to the desired consistency.
8. Turn the jar counter-clockwise and remove from base. Carefully remove the
top cover, then pour and serve.
Fig. 2
Fig. 1
Pulse
Set and hold the pulse,
release the knob to stop
Stop
At any time, set the knob
to “0” to stop the appliance
Highest speed
Lowset speed
5
4
3
2
1
0
P
Fig. 3