GE 169148 Griddle User Manual


 
4. Placement Drip Cups:
You only require one drip cup if you want use the 4-in-1 Grill/Griddle as a contact grill
o
r panini press. Rest the cup underneath the grease spout during the cooking
procedure. Food grease will run off the plates through the grease spout and flow into
the drip cup. Make sure to safety dispose of leftover grease of after cooking. Also, note
that the drip cups are dishwasher safe. You must use both drip cups if you want to use
the appliance as an open grill or griddle. In this condition, make sure to put the drip
cups at either end of the unit directly underneath the outflow spouts.
5. Cooking Plate Insertion:
Put the Grill Griddle into the Flat Position
(see diagram) making sure the controls are
facing front. Insert the plates one at a time.
Please note that each plate precisely fits
the cover or the base of the 4-in-1
Grill/Griddle, and are differentiated by the
words “lower” or “upper” stamped on each
plate. Grab the lower plate, making sure
the cutouts for the heating element are
facing downward. Please note, the drip
spout should be on the front right-hand corner of the plate if you are facing the 4-in-1
Grill/Griddle. Find the metal brackets at the center of the housing unit and angle the
back end of the plates so they are parallel with the cutouts on the back of the plates.
Then slip the plate underneath the brackets and push down on the front end of the
plate until it snaps into place.
8
Hinge
release lever
GE GRILL GRIDDLE r5:Layout 1 8/8/07 4:57 PM Page 8