GE 169232 Kitchen Grill User Manual


 
9
OPERATION
Use as contact grill
The grill can be used as a contact grill for preparing burgers, boneless meat, thin
meat cuts and vegetables.
Use the contact grill function, when you want to cook food quickly (ill.
e
).
Juice and grease flow out via the drip spout of the lower cooking plates (6, 13).
When contact grilling, use only the grill plates (6).
When cooking more then one piece, make sure all pieces have the same thickness
to guarantee even cooking.
Connect the power plug (8) to a wall outlet.
Install cooking plates prior to use.
Set the function switch (9) to the grill position and the blue power light (10) will
come on. Place a drip cup (14) under the spout of the lower plate (ill.
f
).
Set the desired cooking temperature with the temperature switch (12). It may take
up to 10 minutes to heat to the set temperature.
Wait until the green ready light (11) comes on.
Note: The ready light (11) will come on and go off while cooking. This is normal to
regulate temperature.
Place food on the lower plate.
Press down the lever on the upper plate until both plates are in good contact with
the food. Do not use force.
Cook for the required time. You can check the cooking progress by lifting the upper
part (2).
CAUTION: When checking food, stay clear of the cooking plates (6, 13). Danger of
hot oil splatter.
After the cooking process is finished, lift the upper part (2) to the upright position.
Remove food from the lower plate.
Set the function switch (9) to the off position. Remove the power plug (8) from the
wall outlet.
Wait until the grill has cooled down completely before moving or cleaning.
169232-4-in-1-Grill-EN-08.indd 9 1/25/2010 1:53:46 PM