37
Installation Instructions
Replace Oven Parts
After all adjustments are made, replace
the broiler drawer, oven bottom, racks
and oven door.
G
LIGHT THE PILOTS (cont.)
Check Ignition of Surface Burners
Operation of all cooktop and oven burners
should be checked after pilots have been
lighted (on some models) and the range
and gas supply lines have been carefully
checked for leaks.
Standing Pilot Models
Select a top burner knob and simultaneously
push in and turn to HI position. The burner
should light within a few seconds. Try each
burner in succession until all burners have
been checked.
Electric Ignition Models
Select a top burner knob and simultaneously
push in and turn to LITE position. You will
hear a clicking sound indicating proper
operation of the spark module. Once the air
has been purged from the supply lines,
burners should light within 4 seconds. After
burner lights, rotate knob out of the LITE
position. Try each burner in succession until
all burners have been checked.
Quality of Flames
The combustion quality of burner flames
needs to be determined visually.
If burner flames look like (A), call for service.
Normal burner flames should look like (B) or
(C), depending on the type of gas you use.
With LP gas, some yellow tipping on outer
cones is normal.
5
(C) Soft blue
flames—Normal
for natural gas
(B) Yellow tips on
outer cones—
Normal for LP gas
(A) Yellow flames—
Call for service
F