Filter
Top Products
7
Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions
About the shelves and bins. GEAppliances.com
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Large Bins
The larger refrigerator door bins and freezer
tilt-out door bins are adjustable.
To remove: Lift the front of the bin straight up,
then lift up and out.
To replace or relocate: Engage the back side of
the bin in the molded supports of the door.
Then push down on the front of the bin. Bin
will lock in place.
Small Bins
To remove: Lift the front of the bin straight up
then out.
To replace: Position the bin above the
rectangular molded supports on the door. Then
slide the bin down onto the support to lock it in
place.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door
shelf. Place a finger on either side of the
snugger near the rear and move it back
and forth to fit your needs.
Not all features are on all models.
Refrigerator bin
Freezer tilt-out bin
Snugger
Freezer bin
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
to reach items stored behind others. The special
edges are designed to help prevent spills from
dripping to lower shelves.
To remove:
Slide the shelf out until it reaches the stop, then
press down on the tab and slide the shelf
straight out.
Press tab and pull shelf forward
to remove
To replace or relocate:
Line the shelf up with the supports and slide it
into place. The shelf can be repositioned when
the door is at 90° or more. To reposition the
shelf, slide the shelf past the stops and angle
downward. Slide shelf down to the desired
position, line up with the supports and slide into
place.
Make sure you push the shelves all the way back
in before you close the door.
Top freezer bin
CAUTION:
Be careful when
placing items in
the top bin. Make
sure that items do
not block or fall
into the ice chute.