TOOLS YOU WILL NEED:
■ Phillips-head screwdriver
■ 1/4" and 5/16" nutdriver
■ 6" Adjustable wrench
■ Level
■ Carpenter's square
■ Measuring tape
■ Safety glasses
■ Flashlight
■ Bucket to catch water when fl ushing the line
■ 15/16" socket (optional for skid removal)
■ Gloves
For New Installations Only:
■ Tubing cutter
■ Drill and appropriate bits
■ Hole saw set
90° Elbow,
Ferrule and
Compression Nut
Hot Water Line
Hand
Shut-Off
Valve
Side and Top Trim Pieces on some models
Hole Saw Set
Level
Thread
Seal Tape
Air Gap
Strain Relief
Drain Hose
Hose Clamp
1/4" and 5/16"
Nutdriver
15/16" Socket
Bucket
Tubing Cutter
Drill and Bits
Flashlight
Gloves
Phillips-Head
Screwdriver
Carpenter's
Square
6"
Adjustable
Wrench
Safety Glasses
Installation Preparation
2
Measuring Tape
PARTS SUPPLIED
IN INSTALLATION PACKAGE:
■ Two #8-18 x 5/8" Phillips special head screws, to
secure dishwasher to underside of countertop
■ Junction box cover and #10 hex-head screw
■ Hose clamp
■ Drain hose (approximately 78" long)
■ Zip ties
■ Side and top trim pieces (some models)
■ Literature, samples and/or coupons
■ 2 Side-mounting brackets with four #8 pan-head
mounting screws for non-wood countertops
(some models)
MATERIALS YOU WILL NEED:
■ Ferrule, compression nut and 90° elbow (3/8"NPT
external thread on one end, opposite end sized
to fit water supply)
■ Thread seal tape
■ UL-listed wire nuts (3)
■ GPF65 side-mount kit if countertop is
granite or similar material
Materials Needed for
New Installations:
■ Air gap for drain hose, if required
■ Waste tee for house plumbing, if applicable
■ Electrical cable or power cord
■ Screw-type hose clamps
■ Strain relief for electrical connection
■ Hand shut-off valve (recommended)
■ Water line–3/8" minimum copper tubing
■ GPF10L drain hose (10' long), if needed
Junction Box Cover
GPF65
Side-Mount
Bracket Kit
#8 Phillips
Special
Head Screws
5/8" long
Screw Kit
#10
Hex-Head
J-Box Screw
1/2" long
Optional
10' Drain Hose
GPF10L
Zip Ties
Hose Clamps
#8 Phillips
Pan-head Screws
3/8" long for
side-mounting
Side-
Mounting
Brackets
Side Mount Kit
(some models)
Waste Tee
Electrical Cable
(or Power Cord, if applicable)
Wire Nuts (3)
