Filter
Top Products
Installation Instructions
REMOVE THE CENTER HINGE PIN
On models with a freezer door, tape the
door shut with masking tape.
Using an adjustable wrench, remove the
center hinge pin.
2
A
B
REMOVE THE FREEZER DOOR
(freezer door models)
Remove the tape and tilt the door away
from the cabinet. Lift the door off the
bottom hinge pin.
NOTE: There is a plastic washer between
the hinge and the top of the freezer door.
Do not lose.
Set the door on a non-scratching surface
with the inside up.
3
A
B
REMOVE CENTER HINGE
Using an adjustable wrench and Phillips
head screwdriver, remove the bolts and
screws securing the center hinge to the
cabinet. Set hinge, bolts, screws, washer
(on freezer door models) and hinge pin
aside.
On models with a freezer drawer, skip to
Step 7.
4
TRANSFER BOTTOM HINGE
BRACKET
(freezer door models)
Remove the base grille by grasping it at
the bottom and pulling it straight out.
Using a 3/8″ socket driver, remove the
screws securing the bottom hinge bracket
to the cabinet.
Using an adjustable wrench, remove the
hinge pin and washer(s) from the right
side of the bracket and install on the left.
Using a 3/8″ socket driver, remove the
leveling leg bracket from the bottom left
side of the cabinet and install it on the
right side.
5
A
B
C
D
Washer(s)
Left Side Right Side
25