Filter
Top Products
Consumer SupportTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
5
This feature allows you to lock the controls
so the settings cannot be changed.
To lock the controls:
Set the controls to the desired settings.
Press and hold the lock pad for
3 seconds.
When the controls are locked, the indicator
light will come on and the control settings
will not be displayed.
To unlock the controls:
Press and hold the lock pad for 3 seconds.
After unlocking the controls, the settings
will be displayed, the lock indicator light
will go out and the settings can be changed.
About the controls on the refrigerator.
www.GEAppliances.com
The controls will look like one of the following:
ADJUST REFRIGERATOR TEMP
ADJUST FREEZER TEMP
ACTIVATE LOCK
IS COLDEST
9
IS COLDEST
9
HOLD
3 SECS
COLDER
WARMER
COLDER
WARMER
Initially, set the refrigerator control at 5 and the freezer control at 5 and
allow 12 hours for the temperature to stabilize.
Several adjustments may be required. Adjust the controls one increment
at a time, and allow 12 hours after each adjustment for the refrigerator
to reach the temperature you have set.
Setting either or both controls to 0 stops cooling in both the refrigerator
and freezer compartments but does not shut off electrical power to
the refrigerator.
Touch pad controls
•
Setting either control at 0 will automatically set the other control at 0.
The zeros will blink until you set the controls.
•
If both controls are set at 0 and either COLDER pad is pressed, the
controls will automatically reset to 5.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
9 IS COLDEST
ADJUST FREEZER TEMP ADJUST REFRIGERATOR TEMP
5
5
Locking the Controls
(on some models)