GE 49-60021-2 Refrigerator User Manual


 
18
Customer Service Troubleshooting Tips
Operating Instructions
Safety InstructionsInstallation InstructionsCustomer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Customer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Replacing the light bulbs.
Turning the control to the OFF or position does not remove power to the light circuit.
Fresh Food Compartment—Upper Light
Unplug the refrigerator.
To align the control knobs properly,
note position of each knob for proper
reassembly, move both knobs all the way
to the left, then pull them off.
To remove the light shield, pull it
straight out.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the light shield.
Replace the control knobs, move them to their
previous settings and plug the refrigerator back in.
3
2
1
F
R
E
E
Z
E
R
T
E
M
P
E
R
A
T
U
R
E
C
O
L
D
O
F
F
C
O
L
D
E
S
T
1
3
5
*
7
9
FRESH FOOD
TEM
PERATURE
C
O
L
D
C
O
L
D
E
S
T
1
3
5
*
7
9
Profile
*
I
N
I
T
I
A
L
T
E
M
P
E
R
A
T
U
R
E
S
E
T
T
I
N
G
S
A
L
L
O
W
2
4
H
R
S
.
F
O
R
T
E
M
P
.
T
O
S
T
A
B
I
L
I
Z
E
Fresh Food Compartment—Two Lower Lights
(on some models)
These lights are located behind the top drawer.
Unplug the refrigerator and remove the
top drawer and cover.
Grasp the bottom of the light shield
and pull it forward and up to free its
bottom edge.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the light shield,
drawer and cover and plug the refrigerator
back in.
2
1
Freezer Compartment—Non-Dispenser Models
Unplug the refrigerator.
Remove the shelf just below light shield.
Pull the plastic light shield, which is
underneath the ice compartment,
toward you.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the shield and
shelf, and plug the refrigerator back in.
3
2
1
Freezer Compartment—Dispenser Models
Unplug the refrigerator.
Remove the ice storage bin.
Remove screw at top of light shield.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the shield and
ice storage bin, and plug the refrigerator back in.
3
2
1
Screw