Filter
Top Products
Using the clock and timer.
(on some models)
22
Operating Instructions
Installation Instructions
Safety InformationTroubleshooting TipsCustomer Service
The clock must be set for the automatic oven timing
functions to work properly. The time of day cannot be
changed during a timed baking or self-cleaning cycle.
To Set the Clock:
Press the
CLOCK
pad.
Press the
HOUR
and
MIN.
or
SET TIME +/-
pads.
Press the
CLOCK
pad to start.
3
2
1
Make sure the clock is set to the
correct time of day.
To Set the Timer:
Press the
TIMER ON/OFF
pad.
Press the
HOUR
and
MIN.
or
SET TIME +/-
pads
until the amount of time you want shows in the
display. The timer will start automatically within
a few seconds of releasing the pad.
To Reset the Timer:
If the display is still showing the time remaining,
you may change it by pressing the
HOUR
and
MIN.
or
SET TIME +/-
pads until the time you want appears in
the display.
If the remaining time is not in the display, recall the
remaining time by pressing the
TIMER ON/OFF
pad and
then pressing the
HOUR
and
MIN.
or
SET TIME +/-
pads
until the new time you want shows in the display.
To Cancel the Timer:
Press the
TIMER ON/OFF
pad once. To cancel the
timer press the
TIMER ON/OFF
pad again and hold
for 4 seconds.
2
1
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 11 hours and 59 minutes.
or 9 hours and 50 minutes, depending
on your model.
End of Cycle Tones
(on some models)
Clear the tones by pressing the pad of the function you
are using.
or