Filter
Top Products
4
Using Your Tea Maker
1. Before first use, wash all parts as
instructed in “Cleaning.”
2. To make tea, fill the brew tower with
one quart cold water to the Max Fill
Line. Do not use hot water. This level
is indicated inside the reservoir and
on the pitcher. Do not use more or
less water. This unit operates with
one quart of water.
3. Fill the pitcher with ice to the Max
Fill Ice indicator.
4. Adjust the desired brew strength on
the bottom of the brew basket.
5. Make sure the mesh filter is securely
placed in the brew basket.
6. Place tea bags or loose tea in the brew
basket. Place
the tea so that
it is between
the mesh filter
and the pour-
ing spout of
the pitcher
when the brew
basket is in
position.
NOTE: To make one quart of iced tea
use 6 to 10 regular tea bags or 2 to 4
tablespoons of loose tea.
7. Place lid on pitcher. Pull out the
brew tray and
place pitcher
onto the tray
as shown.
8. Plug in the tea maker. Press the On
button to brew tea. The On light will
glow.
9. After brewing is complete, the iced
tea maker will shut off automatically
and the On light will go off.
10. Let all tea drain completely from
brew basket before removing pitcher.
11. Remove pitcher to serve and unplug
unit.
CAUTION: After each use, allow the brew
tower to cool for at least two minutes
before using again.
Cleaning
1. Wash lid, mesh filter, brew basket
and pitcher in hot, soapy water.
Rinse then dry. Do not place in
automatic dishwasher.
2. To clean the outside simply wipe
with a damp cloth.
3. If you make tea daily, clean with
vinegar monthly to prevent hard
water mineral deposits. Pour 2 cups
of white vinegar into the reservoir.
4. Assemble pitcher with brew basket,
mesh filter and lid. Place pitcher on
brew tray.
5. Plug in tea maker and press the On
button. When the brew cycle is com-
pleted discard the vinegar from the
pitcher. Wash pitcher, mesh filter,
brew basket and lid.
6. Repeat process with cold water.
Place tea here
840094400 Ev02 2/11/02 8:55 AM Page 4